Please select your home edition
Edition
Palm Beach Motor Yachts

Bruce Kirby, designer, three-times Olympian, and sailing journalist dies at 92yrs.

by Sail-World.com/nz 20 Jul 2021 01:14 UTC 20 July 2021
Bruce Kirby Kiel Week 1972 © Dick Enersen

Bruce Kirby, best known as the designer of the Laser, now known as the ILCA, has passed away at the age of 92yrs.

He enjoyed a lifetime in the sport as a sailor at Olympic level, America's Cup and Admirals Cup levels, as well as being heavily involved in the International 14ft class at Team racing and Prince of Wales Cup (fleet racing) level. He represented Canada at three Olympic regattas.

Kirby began his working life as a newspaper journalist which he combined with an interest in yacht design.

He switched to being a sailing journalist, becoming Editor of One-Design and Offshore Yachtsman, now Sailing World. However it was the Laser designed as a doodle while talking on the phone, that enabled him to make the financial switch to become a full time, albeit self-taught, designer.

The Laser was the first of the single manufacturer one designs that are now prolific in the sport. It was launched in partnership with his compatriot Ian Bruce, who looked after the production side of what became one of the most popular one-design classes, of which over 220,000 have been built.

The Laser was renamed the ILCA after a copyright dispute with the European based manufacturer of the class. It features a one-design hull, foils, but multiple rigs. As well as the Olympic singlehander, the ILCA is also used at Youth World Championships level for both male and female sailors, albeit it with standard or reduced sized rigs.

Now 50 years old, the class was launched at the New York Boat Show in January 1971 and sold 144 boats off the stand at that show. The Laser proved to be one of only three iconic designs in sailing history, which had a dramatic impact of the sport, the other two being the Windsurfer and Hobie Cat.

In an interview with Soundings Online, published in June 2019, he admitted to a long standing love-affair with the America's Cup, claiming he was "probably the only person left who remembers listening to the America's Cup on the radio before the war. My father and brother listened to it in 1934. By 1937, when Ranger beat Endeavor, I remember distinctly listening to it."

Sailing was a constant presence in his life, and he was good at it, Kirby jumped from the International 14 into the Finn class to sail for Canada in the 1956 Melbourne Olympics, where he became friendly with Paul Elvstrom, the Dane who won three consecutive Olympic golds in that class. Kirby skipped the 1960 Rome Olympics when he and his wife, Margo had their two daughters, but he returned to the Finn class at the 1964 Tokyo Olympics, in Enoshima - venue for Tokyo2020.

The long story of the wee yacht that became the Laser began when an marketing offshoot of Canada's Hudson Bay Company asked Ian Bruce, a Montreal product developer at the time, to come up with proposals for a line of outdoor sporting equipment, Kirby wrote in Sail-World in March 2016, following the passing of his former business partner, Ian Bruce.

Among the proposals listed as a "maybe" was a cartopper sailboat. As Ian had been building and racing my Mark III International 14 and was familiar with my earlier 14s, he called from Montreal and asked me to come up with the design of a cartopper.

This was early October of 1969 and I was still editor of the old One-Design and Offshore Yachtsman magazine (now called Sailing World) and our office had just been moved from Chicago to Stamford, Ct.

Ian had been told by his client that the sailboat might never become part of the package, but as we talked on the phone I was doodling ideas on a yellow legal pad. The tear sheet from this pad later became what we called the "million dollar doodle." Off the phone I did some quick calculations for the little boat. I believe this sketch was the reason why so many people to this day say the boat was designed on the back of an envelope or on a restaurant napkin.

Not so. I took the sketch with its rough calculations home to my office drawing board and over the next few days developed it into a full set of lines in the normal naval architectural manner. The scale was one inch to the foot. Then I did a table of offsets for the hull so it could be drawn full size on the builder's floor; and after that came a single drawing which included the sailplan, deck, cockpit, daggerboard and rudder drawings. I have recently had all this work digitized for later publication

The plans went off to Ian with a note suggesting that "if your clients don't want to build the boat be sure to hang onto the drawings because it might make us a buck some day."

And it turned out that the client soon scrubbed the sailboat idea. So the drawing remained in Ian's drawer for several months. The big break came when the advertising manager of our magazine came up with an idea for a small boat regatta for new or almost new products. Monohulls were to be priced below $1,000 and multihulls under $1,200. What a perfect way to introduce the new boat!

It was now April of 1970 and I called Ian to ask him if he could possibly build a prototype of the cartopper in time for the October regatta. Ever the optimist he jumped at the idea and said he would build two boats to tune them against each other.

In the end he managed against all odds to finish one hull and pry it out of the mould a little earlier than it should have been "popped." But it held its shape in spite of the premature birth. Meanwhile he had sent the sailplan to Hans Fogh in Toronto so he could come up with a trial sail. On midday Friday before the weekend event he left Montreal with hull, mast, daggerboard, rudder and tiller and headed west to pick up Hans and the sail in Toronto. On they drove through the night arriving at the Playboy club after midnight. I flew in from LaGuardia on Friday and on Saturday morning the three of us put the boat together for the first time.

For Bruce Kirby's self-penned story of how the Laser came about click here.

For Part 1 of a two-part interview with Bruce Kirby click here and for Part 2 click here.

For the full interview in Soundings Online click here.

Related Articles

Helping boaters steer clear of common mistakes
Veteran Sea Tow® captains share their tips Boating season is already in full throttle, and Sea Tow®, recognized throughout the marine industry as Your Road Service at Sea®, is proud to offer boating tips to avoid some of the most common mistakes seen on the water. Posted on 24 Jul
TATULA is Tops at ICAST 2025
All out with the new 23 model lineup of cork handle bass rods DAIWA goes all out with new 23 model lineup of 2025 TATULA cork handle bass rods and wins coveted Best Freshwater Rod at ICAST 2025. Posted on 24 Jul
Owner shares why he loves his WorldCat 325DC
Chuck highlights the unique experiences and cherished moments created Embark on the adventures of Chuck Smith, proud owner of the WorldCat 325DC. In this short testimonial, Chuck shares the joys of sandbar outings, fishing escapades, and family travels made possible by the versatility of the 325DC. Posted on 23 Jul
Marine Auctions: July Online Auctions
Bidding to start 24th July and will end 30 July We are now accepting entries for our August Online Auction. Posted on 22 Jul
Mercury Marine expands V10 Verado lineup
With all-new 425hp outboard and enhanced 350hp model Mercury Marine today announced the latest expansion of its award-winning Verado® outboard lineup with the introduction of the all-new V10 425hp Verado outboard and a performance enhanced version of the V10 350hp Verado outboard. Posted on 22 Jul
The after party starts now!
Prestige have already given us two instalments of their M-Line, and now here is the third Prestige have already given us two instalments of their M-Line, and now here is the third - M7 Posted on 21 Jul
Lowrance software update offers new features
New Trolling Motor features, Live Sonar enhancement Lowrance®, a world-leader in fishing electronics, today announced the release of software update 25.2, which is packed with innovative trolling motor features, significant enhancements to ActiveTarget® 2, and expanded third-party integrations. Posted on 16 Jul
DAIWA: Humbled and Honored
Carey Graves accepts Executive Officer role with parent company Globeride, Inc. American DAIWA Corp. President Carey Graves accepts Executive Officer role with parent company Globeride, Inc. Posted on 16 Jul
Lowrance® unveils Ghost® X Trolling Motor
Effortless positioning for a perfect cast every time Lowrance®, a world-leader in fishing electronics, today announced the Ghost® X 47-inch trolling motor, designed for freshwater and featuring an enhanced precision directional indicator, increased power, and the quietest motor yet. Posted on 16 Jul
DAIWA: The 9 Lives of Line
New offerings were popping up like prairie dogs Available in August, XBRAID's new FULLDRAG X9 brings big game fishing the pinnacle in 9-strand braided line technology and advanced manufacturing techniques. Posted on 15 Jul
Maritimo M50Palm Beach Motor Yachts