Please select your home edition
Edition

Convenient hardware speeds fender hanging

by Accon Marine 13 Sep 2022 03:49 UTC

Tying off lines to position fenders before arriving at the dock can be a repetitive and time-consuming chore, particularly when boating solo. Series 401 Quick Release Fender Hangers from Accon Marine make bumper deployment and stowing a snap.

Formed from ultra-durable 316 stainless steel for long life and extreme corrosion resistance, Series 401 Quick Release Fender Hangers utilize a convenient two-piece design. This enables organizing of lines ahead of time, then quickly snapping them in place for rapid bumper deployment at a consistent length.

The surface-mounted base measures a mere 91mm L x 30mm W and installs with two #10 stainless screws. Each fender line attaches to a separate steel ring pin, which plugs into the base with a gentle push when bumpers are needed. Upon leaving the dock, sliding a small tab on the base releases the entire setup for quick storage.

Accon Marine Quick Release Fender Hangers come in two sizes: the 401-R-.5 with a 13mm ring diameter; and the 401-R-1 with a 25mm diameter. Both models stand under 51mm H with the ring pin in place to minimize deck clutter.

For more information visit www.acconmarine.com.

Related Articles

Space-saving Hardware Holds Line & Rod
When it comes to adding hardware, gunwales can fill up fast When it comes to adding hardware, gunwales can fill up fast. The Cleat/Rod Holder Combo offered by Accon Marine combines the practicality of a pull-up cleat with a dedicated fishing rod holder in a small footprint. Posted on 6 Feb
Stainless Push Pole Holders fold flat
710-Series Push Pole Holders have durable UV-resistant glass-filled nylon hooks With 710-Series Push Pole Holders from Accon Marine, it's simple for anglers to install premium hardware that not only secures the gear in the choppiest water but folds flat and out of the way when casting. Posted on 19 Oct 2023
Folding Chocks offer surface mount versatility
Accon Surface Mount Folding Chocks flip up with light finger pressure when needed Chocks that hold mooring lines in position enhance the functionality of any boat but can be difficult to install where they're needed most, such as over bulkheads, adjacent to railings, on swim platforms or on narrow deck spaces. Posted on 5 Sep 2023
Easily upgrade boat hardware in minutes
Accon Marine offers a solution in its range of surface-mount accessories Many owners hesitate to upgrade their boat's hardware because they lack the confidence or equipment to make the requisite deck cut-outs. Posted on 22 Aug 2023
Compact Tie Downs secure range of gear
Providing trim but secure attachment points From fenders to fish stringers to scuba equipment and more, there's always a need to tie down something onboard a boat, and more often than not, no convenient place to do so. Posted on 9 May 2023
Hardware makes deploying a bimini easy
With the two-part 415-TB Quick Release Bimini Strap Turnbuckle Hinge Deploying and adjusting a bimini or sunshade can be a challenge, especially on a breezy day. Posted on 18 Feb 2023
Quick Release Drink Holders from Accon Marine
Plentiful drink holders become expected amenities on boats Plentiful drink holders become expected amenities on boats but can be tricky to retrofit to older models, especially if the owner is uncomfortable taking a hole saw to their vessel or unsure of the precise location of hidden wiring and plumbing lines Posted on 13 Jan 2023
Slim-Line Cleats fit in skinny places
Coming in 114mm, 152mm, 203mm or 254mm sizes to suit a variety of vessels Retractable cleats enhance the appearance, functionality and safety of any boat, but may not fit on some deck designs. Posted on 1 Nov 2022
Pop-up Lights quickly rise and shine
Every light in this Accon Marine series is USCG approved Essential navigation lights, especially deck-mounted models, need not be bulky trip hazards. Accon Marine has led the pack for decades with hardware that retracts flush to the deck when not needed. Posted on 4 Oct 2022
Integrated Cleat Holders reduce Gunwale Clutter
Accon's three models each feature a 152mm pull-up cleat for up to 13mm dia With cleats, rod holders, flag holders, navigation lights, fuel fills, bait wells, step pads and myriad other equipment vying for space at the back end of a boat, it can be a pretty crowded place. Posted on 21 Aug 2022